BST BH211/M Elevator Intercom Master Phone - 1

BST BH211/M Elevator Intercom Master Phone

View Quote List

Please add the quotation and send it to us and get in touch with us immediately

  • Global service 24/7
  • Lowest price for all products
  • Best quality with Production Process
  • After-Sale Warranty
  • Technical Support
SKU: BST BH211/MCategory: Elevator

Description

BST BH211/M Elevator Intercom Master Phone

The BST BH211/M Elevator Intercom is the main handset unit in a two-wire elevator communication system. Depending on the system layout, it can be installed in the machine room, supervisory room or another designated service location where personnel need direct communication with the elevator car.

Where BH211/M Fits Into the System

BH211/M is normally used together with other BH211 intercom units rather than operating as an isolated device.

A typical installation may include:

BH211/M – Main or master handset
BH211/Z – Car slave unit installed at the COP
BH211/F – Extension unit for the car top or shaft pit

This arrangement allows maintenance staff and passengers to communicate through one elevator intercom network using only a two-wire connection.

Why the “M” Version Matters

BH211-series units can look similar but perform different roles.

When replacing an existing BH211/M, it is more useful to confirm the position of the unit in the communication system than to match only the housing appearance.

Common product information includes:

  • Model: BH211/M

  • Type: Two-wire elevator intercom

  • Function: Main / master handset

  • Power supply: 12 / 24VDC depending on system

  • Typical installation: Machine room or supervisory station

  • Audio frequency range: 300–4000Hz

Replacing One Unit in an Existing Intercom System

If the elevator already uses a complete BST BH211 system, check the existing power supply and the other intercom units before replacing only the BH211/M.

Useful information includes the BH211/M label, system voltage, rear terminals, related BH211/Z or BH211/F units and the power supply model.

Is BH211/M the same as BH211/Z?

No. BH211/M is normally the main or master handset, while BH211/Z is used as the slave communication unit inside the elevator car.

Can BH211/M work with a 12V or 24V system?

Both 12VDC and 24VDC applications are documented. The existing intercom system voltage should be checked before replacement.

Is BH211/M used only in the machine room?

Not necessarily. Depending on whether the system is configured as a three-way or five-way intercom, BH211/M may be installed in the machine room, supervisory room or both.

For BST BH211/M requirements, send us the existing intercom label, system voltage and rear wiring photo for replacement confirmation.

Request a Quote

You can also add Line, Zalo or other contact numbers.

Your information is secure and will only be used to respond to your inquiry.