Mitsubishi Elevator Button P235815B000G01

Mitsubishi Elevator Button P235815B000G01 is used in Mitsubishi elevator operating panel and call button replacement applications.

This button may be installed in the car operating panel, landing operating panel, hall call panel, or elevator button panel depending on the original elevator configuration. In the elevator spare parts market, it may also be searched as:

• Mitsubishi Elevator Button
• Mitsubishi Elevator Push Button
• Mitsubishi COP Button
• Mitsubishi LOP Button
• Mitsubishi Hall Call Button
• Mitsubishi Landing Call Button
• Mitsubishi Elevator Operating Panel Button

The main model reference for this page is:

• P235815B000G01

Related market references may include:

• P235815
• P235815L922
• P235851
• P235848

These references are useful for search coverage and quotation confirmation. However, the actual replacement should still be confirmed by the old button label, button character, braille requirement, light color, connector structure, and panel installation position.

Button Application

P235815B000G01 should be treated as an elevator button replacement item, not a button expansion board or display PCB.

Depending on the old panel configuration, it may be used for:

• floor number button
• open button
• close button
• alarm button
• intercom button
• hall call button
• landing call button
• car operating panel button

A button installed inside the elevator car and a button installed on the landing side may look similar from the front, but the rear connector, mounting clip, button depth, lamp structure, and panel opening size may be different.

For this reason, P235815B000G01 should not be selected only by front appearance.

Character, Braille and Light Confirmation

For Mitsubishi elevator buttons, the button code alone may not be enough.

Before ordering Elevator Button P235815B000G01, please confirm:

• complete model number on the old button
• button character or symbol
• whether braille is required
• front photo of the button
• back photo of the button module
• connector or plug structure
• button size and mounting style
• illumination color if available
• whether it is used in COP, LOP, or hall call panel
• complete panel photo showing the installation position

This is especially important when the same button series has different characters, braille plates, light colors, or plug directions.

Practical Replacement Notes

Do not replace this button only by the front style.

Mitsubishi elevator buttons may have similar faceplate design, but the rear structure can be different. A similar-looking button may use a different connector, lamp circuit, mounting clip, or signal wiring.

If the button does not respond, technicians usually check the button contact, wiring harness, connector terminals, button board, and related signal circuit before confirming the button fault.

If the button light does not work, the cause may come from the LED or lamp circuit, the button module itself, the COP / LOP board, or the panel wiring.

For overseas buyers, sending clear photos of the old P235815B000G01 button from both front and back sides is the safest way to confirm the correct replacement before shipment.