Elevator Load Weighing Sensor LC-MV59X - 1

Elevator Load Weighing Sensor LC-MV59X

View Quote List

Please add the quotation and send it to us and get in touch with us immediately

  • Global service 24/7
  • Lowest price for all products
  • Best quality with Production Process
  • After-Sale Warranty
  • Technical Support
SKU: LC-MV59XCategory: Elevator

Description


Elevator Load Weighing Sensor LC-MV59X

The LC-MV59X Elevator Load Weighing Sensor is a compact overload detection device designed for elevators with a movable car floor. Instead of measuring load through a conventional strain-gauge load cell, it detects the small change in position of the elevator car floor as passenger load increases.

This makes LC-MV59X particularly useful when a simple and reliable overload signal is required without installing a conventional load cell into the traction rope or hitch system.

How LC-MV59X Actually Detects Elevator Load

The working principle is based on magnetic displacement sensing.

A magnet is installed on the movable car floor, while the LC-MV59X sensor is fixed to the supporting structure below it. As passengers enter the car, the loaded car floor moves slightly relative to the fixed structure.

The sensor detects this change in distance through the magnetic target. Once the preset position is reached, the internal relay changes state and sends an overload signal to the elevator control circuit.

So, although LC-MV59X is often searched online as an “elevator digital load cell,” technically it works more like an elevator load detection switch with Hall-effect sensing.

Installation Is Part of the Calibration

The LC-MV59X does not simply need to be wired and powered. Its physical position determines the overload switching point.

According to the installation instructions, the sensor should preferably be mounted near the middle area underneath the movable car floor. The magnet is fixed to the car floor with its marked surface facing the sensing end of the LC-MV59X.

The magnet and sensor surfaces should remain parallel.

During commissioning, the elevator is loaded to its rated capacity and the sensor position is adjusted vertically. When the indicator changes to the specified green condition, the sensor is fixed in position.

This means that replacing an LC-MV59X requires both electrical connection and on-site mechanical adjustment.

Electrical Connections

The original LC-MV59X installation documentation specifies AC/DC 24V ±10% operating power and provides both normally open and normally closed overload relay contacts.

Typical wiring includes:

  • Red / Black: AC/DC 24V power supply

  • Yellow / Brown: Normally open overload relay contact

  • Blue / Green: Normally closed overload relay contact

  • Relay contact rating: up to DC/AC 48V, 500mA

The red/green LED indication also helps technicians during installation and load-point adjustment.

Why It Is Different From a Conventional Load Cell

A conventional elevator load cell normally measures mechanical force or strain and may provide a proportional electrical signal corresponding to the actual load.

LC-MV59X follows a different approach.

It detects movement caused by load and provides a switching signal when the adjusted overload point is reached. For this reason, it is especially suitable when the control system mainly needs a reliable overload contact rather than a continuously measured kilogram value.

Industry catalogs consequently describe LC-MV59X as a load weighing device, Hall-effect magnetic sensor and elevator overload sensor, rather than only as a conventional load cell.

When Replacing an Existing LC-MV59X

If an existing sensor has failed, the model number alone is usually easy to confirm. The more important issue is preserving the original installation relationship between the sensor, magnet and movable car floor.

Before replacement, check the original wiring, mounting bracket, magnet position and sensing gap. After installation, the overload switching position should be recalibrated according to the actual elevator rated load.

Is LC-MV59X a digital load cell?

It is commonly sold and searched as an elevator load cell, but its actual operating principle is Hall-effect magnetic displacement detection rather than conventional strain-gauge weighing.

Does LC-MV59X measure the exact passenger weight?

Its primary purpose is overload detection. It provides relay switching outputs according to the adjusted load position rather than functioning as a conventional digital weight display.

What power supply does LC-MV59X use?

The manufacturer installation instructions specify AC/DC 24V ±10%.

Does a new LC-MV59X need adjustment after installation?

Yes. The sensor position and magnetic target relationship need to be adjusted according to the elevator installation and rated load. Simply replacing the sensor without recalibration may result in an incorrect overload switching point.

For LC-MV59X Elevator Load Weighing Sensor requirements, provide the existing sensor photos, wiring arrangement and installation position so the replacement configuration can be checked before quotation.

Request a Quote

You can also add Line, Zalo or other contact numbers.

Your information is secure and will only be used to respond to your inquiry.