Mitsubishi Outbound Call Display Board P366717B000G03

Mitsubishi Outbound Call Display Board P366717B000G03 is used in Mitsubishi elevator landing call and hall display applications.

This board is usually installed in the landing operating panel or outbound call display area, where it helps show elevator direction, call status, floor information, or hall display signals depending on the elevator system configuration.

In the elevator spare parts market, this product may also be searched as:

• Mitsubishi Outbound Call Display Board
• Mitsubishi Landing Display Board
• Mitsubishi Hall Call Display Board
• Mitsubishi Elevator Display Board
• Mitsubishi Elevator Indicator Board
• Mitsubishi Elevator PCB Display Board

The main model reference for this page is P366717B000G03. Since public information for this exact model is limited, replacement should be confirmed by the old display board label, front panel structure, connector layout, and landing station installation position.

Model References for Search Coverage

This page can naturally cover the following model and category references:

• P366717B000G03
• P366717
• P366716B000G02
• Mitsubishi Outbound Display Board
• Mitsubishi Outbound Call Display Board
• Mitsubishi Landing Display Board
• Mitsubishi Hall Call Display Board

Some market information connects P366717 with P366716B000G02 in outbound display board descriptions. Other Mitsubishi outbound call display board pages show nearby display board families such as P366718B000G01, P366718B000G02, P366718B000G03, P366718B000G06, P366718B000G102, and P366718B000G106. These can help with search coverage, but they should not be treated as automatic replacements for P366717B000G03 without checking the original unit.

Where This Board Is Usually Checked

P366717B000G03 is normally related to the elevator landing side, not the car operating panel.

Maintenance teams may inspect this board when the landing display has problems such as:

• no display on the hall call panel
• wrong direction indication
• dim or unstable display
• outbound call display not responding
• floor indication abnormality
• display flickering
• visible PCB or connector damage

These symptoms may not always be caused by the display board itself. The landing button board, power supply, communication line, display cable, connector terminals, and related hall call wiring should also be checked before confirming the PCB fault.

Matching Notes for Buyers

For this type of Mitsubishi display board, appearance can be misleading.

Two display boards may have similar front panels, but the PCB version, connector direction, display size, signal definition, or landing station structure may be different.

Before ordering, please confirm:

• P366717B000G03 marking on the old board
• front and back photos of the PCB
• display window size
• connector quantity and direction
• landing panel installation photo
• old hall call panel photo
• any nearby board number or display module label

If the old label is unclear, a complete photo of the landing station display unit can help confirm whether the required part is P366717B000G03 or another Mitsubishi outbound display board.

Practical Replacement Note

Do not select this board only by the word “display board.”

Mitsubishi elevators may use different display boards for COP, LOP, HOP, hall call, landing display, and outbound call applications. P366717B000G03 should be matched according to the original landing display board label and installation position.

For overseas buyers, sending clear photos of the old board and the landing panel before shipment is the safest way to reduce wrong supply.