
Selcom Door Transformer Q601139 G02 HP0120-01
Please add the quotation and send it to us and get in touch with us immediately
- Global service 24/7
- Lowest price for all products
- Best quality with Production Process
- After-Sale Warranty
- Technical Support
Description




Selcom Door Transformer Q601139 G02 HP0120-01
The Selcom Door Transformer Q601139 G02 is a toroidal power transformer used in elevator door operator applications. The unit shown here is manufactured by Eaglerise Electric & Electronic Co., Ltd. and carries the transformer model HP0120-01 (1B-0120-01).
This is supplied as an original-specification Eaglerise transformer for replacement where the existing door operator uses the same electrical rating, wiring arrangement and transformer model.
Exact Identification From the Original Transformer
The product label provides several useful references for replacement:
Reference: Q601139 G02
Manufacturer: EAGLERISE
Transformer model: HP0120-01
Additional model: 1B-0120-01
Primary input: 230Vac
Frequency: 50/60Hz
Secondary output: 24V-0-24V
Secondary current: 2 × 2.5A
Insulation class: Class B
For maintenance work, the complete transformer label should be compared rather than selecting a replacement only by physical size.
Why 24V-0-24V Matters
This transformer uses a center-tapped 24V-0-24V secondary output.
That wiring configuration is different from a simple two-wire 24Vac transformer. The center connection and output wiring must match the original elevator door controller configuration.
The original unit uses three secondary conductors identified on the label as:
RED – BLU – RED
When replacing the transformer, technicians should confirm both the voltage rating and the terminal/wire arrangement before connection.
Power Supply for the Door Operator System
In an automatic elevator door operator, the transformer supplies the required low-voltage AC power to the door control electronics.
A transformer fault can therefore be associated with symptoms such as:
Door controller not powering up
Unstable door control operation
No low-voltage supply to the controller
Transformer overheating
Abnormal noise or burnt winding smell
Fuse operation after power is applied
Before replacing the transformer, the door controller and downstream circuit should also be checked to make sure a short circuit or damaged load has not caused the transformer failure.
Original Model Is the Best Replacement Reference
Several elevator door transformers have a similar toroidal appearance, but electrical specifications can be different.
For this product, the safest replacement reference is the combination of:
Q601139 G02 + HP0120-01 + 230Vac + 24V-0-24V / 2×2.5A
When requesting a quotation, please provide the original transformer label and connector photos if the model differs from the unit shown here.
FAQ
What is the input voltage of this Selcom door transformer?
The transformer shown is rated for 230Vac, 50/60Hz input.
What is the secondary output?
The label specifies a 24V-0-24V center-tapped output with 2×2.5A current rating.
Is HP0120-01 important when ordering?
Yes. HP0120-01 is one of the main transformer identification numbers and should be checked together with Q601139 G02 and the electrical specifications.
Can another 230V door transformer replace it?
Not automatically. The secondary voltage, center tap, current rating, wiring arrangement, physical dimensions and mounting method should all match the original unit.
For Selcom Door Transformer Q601139 G02 / HP0120-01 requirements, send us the original transformer label and wiring photos for replacement confirmation before quotation.




