Mitsubishi Elevator Button P235804B000G01

Mitsubishi Elevator Button P235804B000G01 is used in Mitsubishi elevator operating panel and call button applications.

This button is commonly requested for Mitsubishi elevator COP, LOP, hall call panel, landing call panel, or elevator button replacement work. In the elevator spare parts market, it may also be searched as:

• Mitsubishi Elevator Button
• Mitsubishi Elevator Push Button
• Mitsubishi COP Button
• Mitsubishi LOP Button
• Mitsubishi Hall Call Button
• Mitsubishi Landing Call Button
• Mitsubishi LEHY Elevator Button
• Mitsubishi LEHY-II Elevator Button

The main model reference for this page is:

• P235804B000G01

Related model references may include:

• P235804B000G02
• P235804B000G03
• P235804B000G04
• P235804B000G05
• P235804B000G06
• P235804B000G07
• P235804B000G08
• P235804B000G09

These model numbers are useful for search coverage and quotation confirmation. However, different G versions may correspond to different button characters, functions, light colors, or plug structures. The old button label and actual panel configuration should always be checked before replacement.

Button Application

P235804B000G01 belongs to the Mitsubishi elevator button replacement category.

Depending on the original elevator configuration, it may be used for:

• floor number button
• open button
• close button
• alarm button
• intercom button
• landing call button
• car operating panel button
• hall call panel button

A button used inside the elevator car and a button used on the landing side may look similar from the front, but the rear connector, mounting structure, lamp type, plug structure, and panel opening size may be different.

For this reason, P235804B000G01 should not be selected only by appearance.

Model and Character Confirmation

Before ordering Mitsubishi Elevator Button P235804B000G01, please confirm:

• complete model number on the old button
• whether the old button shows G01, G02, G03, G04, G05, G06, G07, G08, or G09
• button character or symbol
• front photo of the button
• back photo of the button module
• connector or plug structure
• whether it is single plug-in or double plug-in
• working voltage if shown on the label
• light color, such as orange, red, white, or blue
• whether it is used in COP, LOP, or hall call panel
• complete panel photo showing the installation position

For up and down arrow buttons, the plug structure may be different from normal character buttons. This detail should be confirmed before shipment to avoid wrong supply.

Practical Replacement Notes

Do not replace this button only by the front style.

Mitsubishi elevator buttons may have similar faceplate design, but the rear structure can be different. A similar-looking button may use a different connector, lamp structure, mounting clip, or signal wiring.

If the button does not respond, technicians usually check the button contact, wiring harness, connector terminals, button board, and related signal circuit before confirming the button fault.

If the button light does not work, the cause may come from the LED or lamp circuit, the button module itself, the COP / LOP board, or the panel wiring.

For overseas buyers, sending clear photos of the old P235804B000G01 button from both front and back sides is the safest way to confirm the correct replacement before shipment.