XIOLIFT EUPS Automatic Rescue Device ZDXOHQTA 1500W

XIOLIFT EUPS Automatic Rescue Device ZDXOHQTA 1500W is used for elevator emergency rescue and power failure rescue applications in XIOLIFT elevator systems.

This device is normally installed in or near the elevator control cabinet and works with the elevator controller, brake circuit, motor drive system, door zone signal, battery or backup power section, and related safety circuits. Its purpose is to support automatic rescue operation when the elevator requires emergency movement after power failure, depending on the original elevator configuration.

In elevator spare parts purchasing, this product may be searched as:

• XIOLIFT EUPS Automatic Rescue Device

• XIOLIFT Automatic Rescue Device

• XIOLIFT ARD Device

• Elevator EUPS Rescue Device

• Elevator Automatic Rescue Device

• Elevator Emergency Rescue Unit

• ZDXOHQTA 1500W Rescue Device

• XIOLIFT ZDXOHQTA

• Elevator Power Failure Rescue Device

The main references for this page are:

• ZDXOHQTA

• 1500W

• XIOLIFT EUPS

• XIOLIFT ARD

• XIOLIFT Automatic Rescue Device ZDXOHQTA 1500W

This product should not be selected only by the word “EUPS” or “automatic rescue device”. Different elevator systems may require different power capacity, battery configuration, wiring terminals, control signals, and rescue logic. For actual replacement, the old device label and wiring layout must be checked before ordering.

Before quotation, buyers should confirm:

• complete model number on the old device label

• whether the label shows ZDXOHQTA

• whether the power marking is 1500W

• input and output voltage information

• battery or backup power connection

• terminal layout and wiring direction

• brake or rescue signal connection area

• door zone or controller signal wiring if available

• installation position in the control cabinet

• old device label, terminal, wiring, and cabinet photos

• elevator fault code or rescue failure symptom

This device may be checked when the elevator cannot perform automatic rescue after power failure, rescue running fails, battery backup response is abnormal, EUPS output is unstable, or the rescue system reports a fault. These problems may also come from battery aging, charger failure, wiring problems, controller signal faults, brake circuit issues, door zone signal errors, or incorrect parameter settings.

For overseas buyers, sending clear photos of the old ZDXOHQTA 1500W label, terminal wiring, battery connection, controller interface, and cabinet installation position is the safest way to confirm the correct replacement before shipment.

FAQ

Is this the same as a normal UPS?

No. This product should be confirmed as an elevator EUPS or automatic rescue device, not a general office UPS. Elevator rescue devices may need to match the controller, brake circuit, battery connection, and rescue logic.

Can 1500W be replaced by another power rating?

Not directly. The power rating should match the original elevator system requirement. Please confirm the old device label and elevator configuration before ordering.

What photos should I send before buying?

Please send the old device label, terminal wiring, battery connection, control cabinet position, and any fault code or rescue failure information.

Can this solve all rescue faults?

Not always. Rescue faults may also be caused by the battery, charger, brake circuit, door zone signal, controller settings, or wiring. The complete rescue circuit should be checked before replacement.